Handheld Portable Mini Oscilloscope
Handheld Portable Mini Oscilloscope for only P4,450 instead of P5,933; save up to 25% discount on the regular price
original price
now only
sold
- Voucher Validity: Jun.10,2016 - Oct.07,2016
- Valid for delivery only
- Additional P85 will be added to your bill for deliveries within Metro Manila while P120 for outside Metro Manila
- Items will be delivered at least 2-5 working days within Metro Manila and 5-7 days for outside Metro Manila, after the confirmation of payment
- Voucher is non-refundable
- Printed VigattinDeals voucher is required upon the receipt of item from the courier
- Price is inclusive of VAT
- Buy as many vouchers as you want; vouchers are transferable and may be given as gifts
- Vouchers cannot be used in conjunction with a senior citizen card, any discount card or other promos
- 7-daysreplacement policy; if there are any damages or defects, items shouldbe shipped back within 3 days after receiving the item
- A pocket size digital storage oscilloscope fulfills basic electronic engineering requirements.
- It is base on ARMCortex™-M3compatible 32 bit platform, equipped with 320*240 color display, SD card capability, USB connection, and chargeable batteries.
- Weighs only 60g!Portable Digital Oscilloscope DIY Kit provides waveform viewing, pocket size and over 2 hours battery operation.
- This DIY kit is aopen source code.
- The Schematic, PCB layout and program code is free for re-design.
- It is ideal for production test, research, design and education.
The Pocket Oscilloscope is used mainly applied in the following situations:
Specification:
Display 2.8″ Color TFT LCD
Display Resolution 320×240
Display Color 65K
Analog bandwidth 0 - 1MHz
Max sample rate 1Msps 12Bits
Sample memory depth 4096 Point
Horizontal sensitivity 1uS/Div～10S/Div (1-2-5 Step)
Horizontal position adjustable with indicator
Vertical sensitivity 10mV/Div～10V/Div (with ×1 probe)
0.5V/Div～100V/Div (with ×10 probe)
Vertical position adjustable with indicator
Input impedance >500KΩ
Max input voltage 80Vpp (by ×1 probe)
Coupling DC
Trig modes Auto, Norma, Single, None and Scan
Functionalities: Automatic measurement: frequency, cycle, duty, Vpp, Vram, Vavg and DC voltage
Precise vertical measurement with markers
Precise horizontal measurement with markers
Rising/falling edge trigger
Trig level adjustable with indicator
Trig sensitivity adjustable with indicator
Hold/run feature
Test signal Built-in 10Hz～1MHz (1-2-5 Step)
Waveform storage SD card
PC connection via USB as SD card reader
Upgrade by boot loader via USB
Power supply 3.7V Chargeable Lithium battery / USB
Dimension (w/o probe) 105mm X 53mm X 8mm
Package included:
- Go on-site repair common electronic equipment (air conditioning or industrial frequency power conversion, AC / DC switching power supply or inverter, elevator and building fire-fighting equipment, industrial control circuit)
- Hardware maintenance or software debugging RS232, RS485, I2C, CAN and other communications interface circuits, LED display and keyboard scan driver circuit, brushless motor drive circuit
- Audio equipment and circuits, electronic toys and remote control model car repair electronic circuits
- School after-school teaching practice and student development of electronic small production
- Need to slow signal changes observed for applications (such as: relay and switch contact bounce, the battery charge and discharge curves, power supply load transient response characteristics of the temperature sensor measurements)
- Supply the electronic circuit (SCR voltage, power factor compensation, electronic energy saving lamps, dysprosium lamp mercury lamp sodium lamp drive circuit xenon lights). As for other issues such as: CPU clock, RAM access, bus and USB or Ethernet signal measurement, high frequency and the video circuitry and the need to use the FFT signal analysis, and so occasions, the scope is not competent. Particularly worth mentioning is that this pocket-sized internal battery-powered oscilloscope can be used, so the field measurement, the ground is completely suspended, can be completely the same as the meter, which measured what point, do not consider the problem of ground isolation.
Specification:
Display 2.8″ Color TFT LCD
Display Resolution 320×240
Display Color 65K
Analog bandwidth 0 - 1MHz
Max sample rate 1Msps 12Bits
Sample memory depth 4096 Point
Horizontal sensitivity 1uS/Div～10S/Div (1-2-5 Step)
Horizontal position adjustable with indicator
Vertical sensitivity 10mV/Div～10V/Div (with ×1 probe)
0.5V/Div～100V/Div (with ×10 probe)
Vertical position adjustable with indicator
Input impedance >500KΩ
Max input voltage 80Vpp (by ×1 probe)
Coupling DC
Trig modes Auto, Norma, Single, None and Scan
Functionalities: Automatic measurement: frequency, cycle, duty, Vpp, Vram, Vavg and DC voltage
Precise vertical measurement with markers
Precise horizontal measurement with markers
Rising/falling edge trigger
Trig level adjustable with indicator
Trig sensitivity adjustable with indicator
Hold/run feature
Test signal Built-in 10Hz～1MHz (1-2-5 Step)
Waveform storage SD card
PC connection via USB as SD card reader
Upgrade by boot loader via USB
Power supply 3.7V Chargeable Lithium battery / USB
Dimension (w/o probe) 105mm X 53mm X 8mm
Package included:
- DSO nano (Hardware v1.6) x1
- 3.7v lithium battery with connector x 1
- x1/x10 Probe x 1
- Mini USB Cable x1
